Plates EN 10028:2 1.0425 +AR

Plate EN 10028:2 P265GH +AR material number is 1.0425. It is steel for pressure purposes (P) with minimum yield strength of 265 MPa (265). 1.0425 pressure vessel steel is suited for elevated temperature service, normally found in the oil& gas, petrochemical and chemical industries.
Chemical Composition:
C: 0.25 max; Si: 0.10 - 0.35; Mn: 0.60 - 1.40; P: 0.030max; S: 0.030max; Cr: 0.25 max; Cu: .30max; Mo: 0.10max; Ni: 0.30max
Available Size:
Thickness:6mm-220mm
Width:1500mm-4200mm
Length:3000mm-18000mm
Heat Treatment:As rolled, hot rolled, Normalized,Stress relieving annealing
Additional Condition :
UT (Ultrasonic examination),AR(As Hot Rolled only),TMCP(Thermal Mechanical Control Processing),N(Normalized),Q+T(Quenched and Tempered),Z Direction Test(Z15,Z25,Z35) ,Charpy V-Notch Impact Test,HIC test, NDT ,PWHT( Simulated Post Weld Heat Treatment),NACE0175,The Third Party Test (Such as SGS Test),
Coated or Shot Blasting and Painting.
P265GH/1.0425 carbon and low alloy steels may be susceptible to cracking when exposed to corrosive H₂S containing environments, usually referred to as “sour service”. A test to evaluate the resistance to hydrogen induced cracking in accordance with annex D may be specified at the time of order.
If you’re interested in P265GH/1.0425 pressure vessel steel plates, BEBON STEEL is a good partner.